The Ohlins RXF36 sets the standard for precision and performance. The suspension technology that Ohlins brings to the MTB market in the RXF air spring, chassis and the TTX damper are world-leading with many other brands releasing similar products after a few years of head-scratching!
Why Ohlins RXF 36?
The Ohlins RXF 36 is one the most tuneable forks on the market with a host of features to help you get the best performance from your setup.
The race proven TTX 18 dampening from the DH Race Fork has been reworked for the all new TXF 36 M2 fork to give optimal traction and control on trails and Enduro race courses.
The TTX 18 cartridge kit featuring trail optimised 18mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved.
The damping adjustment range is set specifically for trail to Enduro race use with 15 clicks of low speed compression and low speed rebound. For the high speed compression damping you get 3 clicks plus a climb mode setting.
The re-tuned twin piston three chamber air spring system allows total air spring tuning from the initial movement through to the bottom out.We also improved the tire clearance. The chassis will take up to a whopping 29 x 2.8 and 27.5 x 2.8 as well as 27.5+ x 3.2.
There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the race courses.
Features
-
TTX damper technology
-
Overall improvements for reducing friction
-
Independent spring and damper system
-
Retuned air spring system
-
Infinite 'ramp up' adjustment with just a shock pump
-
36 mm upper tube diameter
-
44mm short offset and 51mm normal offset available
-
Max tyre size 27.5 x 2.8
Specifications
Travel
150MM / 160MM / 170MM / 180MM
Travel Adjustment
INTERNAL - SERVICE & PARTS REQUIRED
Axle Spacing
110MM BOOST
Axle Type
15MM FLOATING THRU AXLE
Damper Type
TWIN TUBE
Spring Type
3 CHAMBER AIR SPRING
Compression Adjustment
HIGH & LOW SPEED
Rebound Adjustment
LOW SPEED
Air Spring Volume Adjustment
INFINITE ADJUSTMENT VIA 3 CHAMBER AIRSPRING
Stanchion Diameter
36MM
Stanchion Coating
HARD ANODISED
Offset
44MM OR 51MM
Steerer Type
TAPERED 1 1/8 - 1.5
Steerer Material
ALUMINIUM
Min. Rotor Size
180MM
Max. Rotor Size
203MM