Holeshot Tubeless Rim Tape creates a strong, airtight seal with your rim and leaves no mess behind when removed!

With the perfect amount of stretch and a large, rigid recyclable core, the tape can be pulled and applied with tension, contouring tightly to your rim for a secure fit.

Key Product Features

• Constructed from high tensile strength film and primed with a bespoke adhesive

• Optimal amount of stretch and a large, rigid recyclable core, the tape can be pulled and applied with tension, tightly contouring to your rim for a perfect fit.

• The semi-translucent design makes finding the valve hole and serial numbers easy.

Our Holeshot tape is available in 10-meter rolls and four different width options: 23mm, 27mm, 32mm, and 37mm.

Fitting Instructions:

1. Remove tyre and any old rim tape.
2. Clean and degrease rim thoroughly (nobody likes a dirty rim!).
3. Ensure rim is completely dry before application.
4. Starting at least 10cm before the valve hole, Press the tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air.
5. Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut.
6. Use a small spike to pierce the tape in the centre of the valve hole.
7. Remove dust cap and push valve through the valve hole.
8. Apply lock ring tightly by hand, ensuring there are no air gaps.
9. Refit tyre, add Peaty's Tubeless Sealant, inflate tyre.
10. Ride!.