Skip to main content

Evil The Following FAQ

Below are a few of the FAQ about the Evil Following. Contact us if you do need any advice or help.

 

HOW DO I ADJUST MY FLIP CHIPS?

Remove upper and lower linkage bolts then remove 3 flip chip bolts. Lightly wiggle flip chips free and flip 180 degrees with desired position facing up. The flip chip position will be visible when sitting on the bike and should read Low/X-Low depending on model.

 

WHAT SIZE IS THE SEAT POST?

The Following uses a 30.9 seat post and a 34.9 seat clamp.

 

WHAT IS THE WARRANTY ON THE FOLLOWING?

Limited Lifetime Warranty. For more information on the Evil Limited Lifetime Warranty visit: https://www.evil-bikes.com/pages/warranty-policy

 

WHAT TYPE OF HEADSET DOES THE FOLLOWING USE?

The Following uses a Cane Creek 40 Series Integrated IS42 - IS52 or FSA Integrated Tapered No.57/68 headset, alternatively bearings from other suppliers can be used. Upper Bearing 30.2x41x6.5 36˚/45˚ Lower Bearing 40×51.8×8 36˚/45˚.

 

WHAT IS THE SUGGESTED FORK LENGTH FOR THE FOLLOWING?

The Following was designed around 120mm and 130mm forks.

 

WHAT SHOCKS CAN THE FOLLOWING ACCEPT?

The Following works with the Rockshox Deluxe RCT, 165X45 with custom Evil tune, but will also fit most trunnion mount metric 165x45 inline and external reservoir shocks. Contact us at info@evil-bikes.com for proper tune and fit information.

 

WHAT CRANKS DO I PUT ON MY SUPERBOOST+ BIKE?

You need to run a SuperBoost+ specific crankset on your Offering. The cranks need to work with a 56.5mm chainline. Please follow the crank vendors installation instructions for assembly.