Skip to main content
Rocky Mountain Altitude Alloy 30

Rocky Mountain | Altitude Alloy 30

£ 3,299.00
Tax included.

Pairs well with

Charge harder. Go faster.

Purpose-built for speed. Demolish descents and hold bolder lines.

 

Completely reimagined, from the ground up.

The all-new design makes the Altitude even faster than before. With increased stiffness and a lower centre of gravity, overall ride performance is leveled up. 

 

Eats up tough terrain.

Its finely tuned rate curve and concentrated suspension mass let it handle bumps effectively, keeping the rear wheel glued to the ground under power. 

 

Ride support you can count on.

The linear rate curve provides a supportive and predictable feel with minimal unwanted movement or harshness. Mid to large-sized impacts are absorbed effectively without compromising speed or control.

 

“I've been riding iterations of the Altitude for the last 10 years and this one is by far the most exciting yet. The evolution of the bike makes it without a doubt the most capable it’s ever been, and I've never been more excited to take a bike to the races.”

Rémi Gauvin- Rocky Mountain Athlete

Specifications

Frame - FORM™ Alloy | Full Sealed Cartridge Bearings | Threaded BB | Internal Cable Routing | 2-Bolt ISCG05 Tabs | RIDE-4™ Adjustable Geometry | 160mm Travel | FORM™ Alloy Rear Triangle

Fork - RockShox Zeb RC 170mm | 27.5 = 38mm Offset | 29 = 44mm Offset
Front Travel - 170
Shock - Fox Float X Performance | Sealed Bearing Eyelet | 40x10mm F Hardware | SM = 210x55mm | MD - LG - XL = 230x60mm | Size-Specific tune in FAQ
Rear Travel - 160
Headset - FSA ZS56/66 Reach Adjust | 0mm Cups Installed | +/- 5mm Cups Included | Sealed Stainless 36°x45° Bearings | 30.2mm x 41mm x 6.5mm Upper | 40mm x 51.8mm x 8.0mm Lower | 1.5" Crown Race
Stem - Rocky Mountain 35 AM | 0° Rise | All Sizes = 40mm
Handlebar - Rocky Mountain AM | 780mm Width | 38mm Rise | 9° Backsweep | 5° Upsweep | 31.8 Clamp
Grips - ODI Elite Pro Lock On
Brakes - Shimano MT6120 4 Piston | Metal Pads
Shifters - Shimano Deore 12spd
Rear Derailleur - Shimano Deore 12spd
Cranks & Chainring - Shimano Deore | 32T | 24mm Spindle | Crankarm Length: SM = 165mm | MD - XL = 170mm
Bottom Bracket - Shimano Threaded BBMT501-B
Cassette - Shimano Deore 10-51T 12spd
Chain - Shimano M6100
Front Hub - Shimano TC500 | 15mm Boost
Rear Hub - Shimano TC500 Boost 148mm
Spokes - 2.0 Stainless
Rims - WTB ST i30 TOUGH TCS 2.0 | 32H
Tyres - F: Maxxis Minion DHF 2.5 WT EXO Tubeless Ready | R: Maxxis Minion DHR II 2.4 WT EXO Tubeless Ready
Seatpost - Tranz X +RAD1.0 Adjustable Dropper Post | 30mm Adjustment | Alloy I-Spec EV Lever | 30.9mm | SM = 150mm | MD = 170mm | LG - XL = 200mm
Saddle - WTB Volt  142 | Steel Rails