Skip to main content
Enve M730 mtb rim
Enve M730 mtb rim
Enve comparison chart
Enve comparison chart
Enve rim M730 profile
Enve rim M730 profile
Enve M730 mtb rim
Enve comparison chart
Enve rim M730 profile


£ 1,200.00
Tax included.
  • 29"
  • 27.5"
  • 32h
  • FREE Delivery on orders over £40
  • Standard delivery £4.99
  • Whippet delivery £7.99

T’s&C’s apply

Designed for enduro racers, the M730 features the world's lightest and most effective anti-flat system so you can hit the toughest trails without limitations.

ENVE products have been used to gain more than 80 DH World Cup wins and podiums and with the M7 series, the US brand has taken this race-winning technology and honed it specifically for enduro racing. 

Why choose the M730

Available in 27.5 and 29" wheel sizes, the M7 series comes in two internal rim widths – 30 and 35mm – for tailored enduro performance no matter your tyre preference. With an internal rim width of 30mm, the M730 is designed for 2.3 to 2.5" tubeless tyres, perfect for riders seeking maximum speed along with exacting cornering precision.

Nothing kills the race vibe or saps confidence like a flat tyre or broken rim, so ENVE has incorporated its exclusive Dynamic Impact Design technologies into the M730 to banish the fear of pinch flats and allow you to go full-send while adding the traction and control of lower tyre pressures.

With the M730, this tech takes the form of ENVE's patent-pending Protective Rim Strip. Race-proven on the DH World Cup circuit, the custom rim strip is moulded in-house by ENVE and works alongside the rim's full carbon construction to absorb impact energy – protecting the tyre and rim against the biggest hits.

While the M7 series wheels already have a 10 to 20% improvement in impact strength compared to the previous generation, the rim strip is so effective that in all ENVE's lab and trail tests, the team couldn't cause a pinch flat to occur. The strip also means no tape is required and that the air chamber is completely sealed, maintaining air pressure even if the rim gets damaged in the heat of racing, so you’ll be able to finish your stage.

All this means you can run the tyre pressures you want to optimise cornering and rock-garden stability, improve ride feel and go even faster while also unlocking the full potential of your performance enduro bike.

As with all ENVE's rims, the M730 is handmade at ENVE HQ in Utah, USA, from raw uni-directional carbon fibre. This gives the ENVE team total control over every aspect of production to ensure a quality product made to the finest standards.

The M730's carbon laminate has been tuned for a smoother ride that improves tracking, control and compliance while reducing fatigue. The bespoke construction process also utilises patented moulded spoke holes, removable bladders for weight-saving precision and a gorgeous paint-free finish to further reduce weight while maintaining strength, stiffness and allowing the beautiful handmade quality to shine through.

Key features:

  • The ultimate enduro wheel
  • Strong, compliant and lightweight
  • Designed and engineered for 2.3” to 2.5” tyres
  • Protective Rim Strip for max pinch and impact resistance
  • No tape tubeless set-up
  • Air retention even if carbon bead is damaged
  • Uni-directional carbon construction
  • Patented Molded Spoke Hole Technology
  • Hookless bead design
  • 5-year Factory Limited Warranty, cover through ENVE's Incidental Damage Protection Programme
  • Weight 27.5" - 530g 29" - 571g

Rims are sold as single units and are packaged with the following:

  • Nipples
  • Tubeless setup kit
  • Warranty/information book


M7 and M9 series wheels cannot be ridden without the Protective Rim Strip installed. The Protective Rim Strip cannot be used with any other wheels. These wheels are only compatible with tubeless tyres.

All images are for illustrative purposes only.

ENVE Factory Limited Warranty

Coverage for the original owner against defects in materials and workmanship for the period of five years from the original purchase date. Product registration is required within 60 days of purchase. Second-hand owners are covered from the product's date of manufacture.

ENVE Incidental Damage Protection

This program provides a no-charge rim replacement for your first three years of ownership and a prorated replacement thereafter for damage inflicted upon your SES rim when racing, riding, or transporting your bicycle. Original owners only. Product registration is required within 60 days of purchase to be eligible for this program.


Rim Specification
Depth 27mm
Internal Width 30mm
External Width 38mm
Hole Count 32
Effective Rim Diameter 27.5" 559mm
Effective Rim Diameter 29" 599mm
Recommended Tyre Size 2.3"- 2.5"
Tubeless Compatible YES

Customer Reviews

Be the first to write a review